Speaker set, Dual 11x15mm, Modular Soundbox kit for 28mm, 20x40mm, 16x35mm

With this new modular speaker baffle set you can easily assemble your tailormade speaker baffle suitable for two miniature speakers. Both – diameter and height – can be individually adapted to suit your needs. Considerable audio pressure and excellent sound fidelity can be generated by employing two speakers wired in parallel.

Two of the popular 11x15mm sugar cube speakers with 8 Ohm impedance each are supplied with a sealed mounting plate. These speakers may be wired in parallel for a total load on the decoder of 4 ohms. This is recommended for the best sound quality.

First select one of the three base frames subject to the type of speaker you want to assemble, namely a circular frame with 28mm diameter or a rectangular type with either 16x35mm or 20x40mm. After you have inserted the speakers into the base frame you may now determine the height of the speaker baffle. The minimum height is 6mm, which can be raised to 8mm, 9mm, 10mm, 11mm or 13mm by adding up to three intermediate frames. The set contains two 2mm high and one 3mm high intermediate frame. They can easily be fixed with some glue suitable for plastic materials.

The higher the speaker baffle, the better the bass fidelity. It certainly pays off to utilize the entire space available.

These speakers are only to be used with the LokSound V4.0 and LokSound Select family decoders. DO NOT use with previous LokSound V3.5 decoders.